Unit 5: Operations management

5.5 Break-even analysis

SL and HL Full notes Mindmap 11 key terms

Study mode

Text size

Section 01: What the IB course asks

The content statements for 5.5, in the platform's words, with the depth of teaching the guide sets (guide, from p. 34).

  • Total contribution versus contribution per unit AO2
  • The break-even chart: break-even quantity, profit or loss, margin of safety, target profit output, target profit and target price AO2, AO4
  • The effects of changes in price or cost on the break-even quantity, profit and margin of safety, shown graphically and by calculation AO2, AO4
  • The limitations of break-even as a decision-making tool AO3

AO1 knowledge and understanding · AO2 application and analysis · AO3 synthesis and evaluation · AO4 a range of skills. A question can use a command term at its statement's level or below. The whole course.

Section 02: Why it matters

Every business needs to know how much it must sell before it stops losing money. Break-even analysis answers that question and several more: how far sales can fall before a loss, how many units would deliver a target profit, what price would, and what happens to all of these when a price or a cost changes.

It rests on one idea, contribution: what each sale adds towards the fixed costs and then towards profit. With contribution and a break-even chart you can answer the calculations this subtopic brings, which are typical of Paper 2 and its quantitative focus. The guide also asks you to judge the tool (AO3), because its answers are only as good as its assumptions.

By the end you can

  1. Distinguish between contribution per unit and total contribution, and use each in the right calculation.
  2. Construct a break-even chart and annotate the break-even point, profit or loss and the margin of safety.
  3. Calculate the break-even quantity, profit or loss, margin of safety, target profit output and target price.
  4. Analyse how a change in price or costs affects the break-even quantity, profit and margin of safety, on a chart and by calculation.
  5. Evaluate break-even analysis as a tool for making decisions.

Section 03: Contribution per unit and total contribution

Break-even analysis sorts costs into two kinds. Fixed costs, such as rent, salaries and insurance, stay the same whatever the output in the short run. Variable costs, such as materials and packaging, rise with every unit made. Subtopic 3.3 covers both.

Contribution per unit is the selling price minus the variable cost of one unit: what each extra sale adds once its own variable cost is paid. It is not profit. Until the fixed costs are covered, each unit's contribution goes towards paying them; only after that does contribution become profit.

Total contribution is the contribution from all the units sold: contribution per unit times the number sold, or total revenue minus total variable costs. Profit is total contribution minus fixed costs, so a business breaks even at the output where its total contribution exactly equals its fixed costs.

Use contribution per unit

To work out how many units are needed to break even or to reach a target, because fixed costs are covered one unit at a time.

Use total contribution

To work out the profit or loss at a given level of sales, and to compare how much different products earn overall.

A common mistake

Calling contribution per unit "profit per unit". A unit sold below the break-even point still has a positive contribution, yet the business is making a loss.

Costs and revenue as output changesFour small charts against output, using fictional figures. Fixed costs, such as rent and salaries, stay at $20,000 whatever the output in the short run. Variable costs, such as materials and packaging, rise by $15 with each unit. Total costs are fixed plus variable costs, so they start at $20,000 and rise by $15 a unit. Total revenue is price times quantity sold, rising by $25 a unit from zero. Costs can also be direct, traced to one product, or indirect overheads shared across products.Fixed costsOutputDo not change with outputin the short run: rent,salaries. Here $20,000.Variable costsOutputRise with each unit made:materials, packaging. Here$15 a unit.Total costsOutputFixed plus variable costs.They start at the fixedcosts.Total revenueOutputPrice × quantity sold.Here $25 a unit.

Costs and revenue as output changes Fixed, variable and total costs, and total revenue.
Text description

Four small charts against output, using fictional figures. Fixed costs, such as rent and salaries, stay at $20,000 whatever the output in the short run. Variable costs, such as materials and packaging, rise by $15 with each unit. Total costs are fixed plus variable costs, so they start at $20,000 and rise by $15 a unit. Total revenue is price times quantity sold, rising by $25 a unit from zero. Costs can also be direct, traced to one product, or indirect overheads shared across products.

Contribution per unit

Contribution per unit = selling price per unit − variable cost per unit

Total contribution

Total contribution = contribution per unit × quantity sold

Equivalently, total revenue − total variable costs.

Profit or loss

Profit = total contribution − total fixed costs

The guide's formula list includes none of the break-even formulas; these are the standard forms used across this site.

Section 04: The break-even chart

A break-even chart shows costs and revenue against output on one graph. Output goes on the horizontal axis (the chart assumes that everything made is sold), and costs and revenue in money go on the vertical axis. Three straight lines are drawn:

  • Fixed costs: a horizontal line at the level of fixed costs.
  • Total costs: starting at the fixed costs on the vertical axis and rising by the variable cost of each unit.
  • Total revenue: starting at zero and rising by the price of each unit.

The break-even point is where total revenue crosses total costs. Read down to the horizontal axis for the break-even quantity, and across to the vertical axis for break-even revenue. To the left of the break-even point, total costs are above total revenue and the vertical gap between them is the loss; to the right, the gap is the profit. Profit or loss is one of the aspects of the chart the guide lists, so practise reading it at several outputs.

To construct a chart in an examination, work out the break-even quantity first so that you can choose sensible scales. Plot two points for each straight line, at zero output and at the maximum output or capacity. Label both axes, every line and the break-even point, and give the chart a title. The break-even workspace lets you draw and change one.

The break-even chartBreak-even chart for a fictional product selling at $25 with a variable cost of $15 a unit and fixed costs of $20,000. Fixed costs are a horizontal line at $20,000. Total costs start at $20,000 and rise by $15 a unit. Total revenue starts at zero and rises by $25 a unit. The lines cross at the break-even point, 2,000 units and $50,000 of revenue. Below that output the gap between the lines is a loss; above it, a profit. At current sales of 3,000 units the margin of safety is 1,000 units and the profit is $10,000.0$20k$40k$60k$80k$100k01,0002,0003,0004,000Output and sales (units)Costs and revenue ($)LossProfitFixed costsTotal costsTotal revenueBreak-even point2,000 units, $50,000Current sales 3,000 unitsMargin of safety 1,000 unitsProfit at current sales $10,000Fictional: price $25, variable cost $15 a unit, fixed costs $20,000.
The break-even chartBreak-even chart for a fictional product selling at $25 with a variable cost of $15 a unit and fixed costs of $20,000. Fixed costs are a horizontal line at $20,000. Total costs start at $20,000 and rise by $15 a unit. Total revenue starts at zero and rises by $25 a unit. The lines cross at the break-even point, 2,000 units and $50,000 of revenue. Below that output the gap between the lines is a loss; above it, a profit. At current sales of 3,000 units the margin of safety is 1,000 units and the profit is $10,000.0$50k$100k02,0004,000Costs and revenueOutput (units)FCTCTRBreak-even: 2,000 units, $50,000 ofrevenue, where total revenue (TR)meets total costs (TC).At current sales of 3,000 units(dotted line): margin of safety 1,000units, profit $10,000.Shaded: loss below break-even, profitabove it. FC: fixed costs.Fictional: price $25, variable cost$15 a unit, fixed costs $20,000.

The break-even chart Where total revenue meets total costs; profit, loss and the margin of safety on either side.
Text description

Break-even chart for a fictional product selling at $25 with a variable cost of $15 a unit and fixed costs of $20,000. Fixed costs are a horizontal line at $20,000. Total costs start at $20,000 and rise by $15 a unit. Total revenue starts at zero and rises by $25 a unit. The lines cross at the break-even point, 2,000 units and $50,000 of revenue. Below that output the gap between the lines is a loss; above it, a profit. At current sales of 3,000 units the margin of safety is 1,000 units and the profit is $10,000.

Break-even quantity

Break-even quantity = total fixed costs ÷ contribution per unit

If the answer is not a whole number, round up, because one unit fewer would leave a small loss.

Break-even revenue

Break-even revenue = break-even quantity × selling price per unit

Not named in the guide, but it follows from the break-even quantity and can be read from the chart's vertical axis.

Profit or loss at any output

Profit or loss = total revenue − total costs

On the chart, the vertical gap between the two lines.

Section 05: The margin of safety

The margin of safety is how far actual or forecast sales are above the break-even quantity: how much sales could fall before the business starts to make a loss. On the chart it is the horizontal distance between the break-even quantity and the current level of output.

It is usually given in units, and it is often more telling as a percentage of sales, because a cushion of 500 units is large for a business selling 1,000 and thin for one selling 50,000. It can also be given in revenue, by multiplying the units by the price.

A large margin of safety means a business can absorb a bad month, a new competitor or a price war. A small one, or a negative one (sales below break-even), is a warning and a reason to look again at prices, costs and the sales forecast. Because the forecast is an estimate, so is the margin of safety built on it.

Margin of safety

Margin of safety = actual or forecast output − break-even quantity

Margin of safety as a percentage

Margin of safety (%) = margin of safety ÷ actual or forecast output × 100

Standard forms; the guide gives no formula.

Section 06: Target profit, target profit output and target price

Break-even analysis can also work backwards from a target profit, the profit a business sets out to make in a period. There are two ways to reach it.

The target profit output is how many units must be sold, at the current price, to make the target profit. The units must cover the fixed costs and the target profit, one contribution at a time. On the chart it is the output at which the gap between total revenue and total costs equals the target.

The target price is what must be charged, at the expected level of sales, to make the target profit. The fixed costs and the target profit are shared over the expected sales, and the variable cost of each unit is added on top. On the chart, it is the price whose revenue line, at the expected sales, sits exactly the target profit above total costs. Rounding a target output up to the next whole unit, and a target price up to the next cent, makes sure the target is reached rather than just missed.

Both answers need a reality check. A target output above capacity cannot be produced without investment, and a target price above what customers will pay will not deliver the expected sales.

Target profit output

Target profit output = (total fixed costs + target profit) ÷ contribution per unit

Target price

Target price = ((total fixed costs + target profit) ÷ expected sales) + variable cost per unit

Standard forms; the guide's formula list does not include them.

Section 07: When price or costs change

The guide asks you to show the effect of a change in price or cost in two ways: on the chart (graphically) and by recalculating (quantitatively). Start with contribution per unit, because almost everything else follows from it.

On the chart, a change in price pivots the total revenue line around the origin. A change in variable cost per unit pivots the total cost line around its starting point, the fixed costs on the vertical axis. A change in fixed costs shifts the fixed cost and total cost lines up or down in parallel. Wherever the revenue and total cost lines now cross is the new break-even point.

The catch is price. A higher price lowers the break-even quantity, but customers may buy less, so profit can fall; a lower price raises the break-even quantity, but it may win enough extra sales to raise profit. Break-even analysis cannot say which will happen. That depends on how customers respond, which needs market research or past evidence.

Higher price

Revenue line steeper. Contribution per unit rises and the break-even quantity falls. If sales hold, the margin of safety and profit rise; if sales fall far enough, profit falls.

Lower price

Revenue line flatter. Contribution per unit falls and the break-even quantity rises. Profit and the margin of safety fall unless sales rise enough to make up for it.

Higher variable cost per unit

Total cost line steeper, from the same starting point. Contribution per unit falls, the break-even quantity rises, and at unchanged sales the margin of safety and profit fall. A lower variable cost does the reverse.

Higher fixed costs

Fixed and total cost lines shift up by the amount of the rise. Contribution per unit is unchanged, the break-even quantity rises, and at unchanged sales the margin of safety and profit fall. Lower fixed costs do the reverse.

The effect of a price rise on the break-even quantityBreak-even chart with fixed costs of $20,000 and a variable cost of $15 a unit. At a price of $25 total revenue meets total costs at 2,000 units. When the price rises to $30, the total revenue line becomes steeper and meets total costs at 1,333.3 units, rounded up to 1,334. A higher price lowers the break-even quantity, although sales may fall at the higher price.0$20k$40k$60k$80k$100k$120k01,0002,0003,0004,000Output and sales (units)Costs and revenue ($)Fixed costsTotal costsTR at $25TR at $301,334 units2,000 unitsBreak-even fallsPrice $25: break-even 2,000 unitsPrice $30: break-even 1,334 units (1,333.3 rounded up)Fictional: fixed costs $20,000, variable cost $15 a unit.
The effect of a price rise on the break-even quantityBreak-even chart with fixed costs of $20,000 and a variable cost of $15 a unit. At a price of $25 total revenue meets total costs at 2,000 units. When the price rises to $30, the total revenue line becomes steeper and meets total costs at 1,333.3 units, rounded up to 1,334. A higher price lowers the break-even quantity, although sales may fall at the higher price.0$60k$120k02,0004,000Costs and revenueOutput (units)FCTC$25$30At $25, total revenue (TR) meets totalcosts (TC) at 2,000 units.At $30, it meets them at 1,333.3units, rounded up to 1,334: thebreak-even quantity falls.Fictional: fixed costs (FC) $20,000,variable cost $15 a unit. Sales mayfall at the higher price.

A price rise on the break-even chart A higher price steepens total revenue and lowers the break-even quantity.
Text description

Break-even chart with fixed costs of $20,000 and a variable cost of $15 a unit. At a price of $25 total revenue meets total costs at 2,000 units. When the price rises to $30, the total revenue line becomes steeper and meets total costs at 1,333.3 units, rounded up to 1,334. A higher price lowers the break-even quantity, although sales may fall at the higher price.

Section 08: Break-even as a decision-making tool

Break-even analysis is popular because it is simple, quick and visual. It suits a start-up writing a business plan or asking a bank for a loan, a business testing a new product, and a manager asking what if the price or a cost changes.

But it simplifies the real world in ways that limit how far its answers can be trusted. The guide asks you to evaluate those limitations (AO3), which means saying why each one matters for the business in the case, not just listing it.

Advantages

  • Simple to calculate and to understand, even without financial training.
  • The chart shows at a glance how profit or loss changes with output.
  • A quick way to test the effect of a change in price or cost before making it.
  • Sets clear targets, such as the sales needed to break even or to reach a target profit.
  • Supports a business plan or a loan application by showing how the plan covers its costs.

Limitations

  • Assumes that everything produced is sold, with no unsold stock, although output and sales often differ.
  • Assumes a single selling price, although businesses give discounts, charge different customers different prices and hold sales.
  • Assumes the variable cost per unit stays the same, although bulk-buying discounts lower it and overtime or waste can raise it, so the lines are rarely straight.
  • Assumes fixed costs stay fixed, although they step up when output outgrows capacity and the business needs more space or machines.
  • Assumes every cost is either fixed or variable, although many, such as energy bills, are semi-variable and have to be split between the two.
  • Hard to use for a business that sells many products, because the fixed costs must be shared between them in a way that is partly arbitrary.
  • Static, showing a single period while prices and costs keep changing, so a chart soon goes out of date.
  • Only as good as its data, especially the sales forecast, and it cannot say whether customers will actually buy the quantity it calls for.
  • Ignores qualitative factors, and measures profit rather than cash, so a business above break-even can still run short of cash.

Section 09: In practice: industries and stakeholders

The same ideas look different from one industry to the next, and land differently on each group with a stake in the business.

Across industries

Airlines

Fuel, crew, aircraft and airport charges barely change with one more passenger, so almost all costs are fixed for a flight and the break-even point is a share of seats that must be filled, often called the load factor. Above it, each extra passenger is nearly all contribution, which is why airlines work so hard to fill the last seats.

Restaurants and cafés

Rent and staff are largely fixed, while food and drink are variable, so a restaurant knows how many covers a night it needs to break even. Margins of safety are often thin, and a quiet season or a rise in food prices can push a busy-looking restaurant below its break-even point.

Manufacturing

Most factories make many products, so the fixed costs have to be shared between them before each product's break-even point can be found, and the sharing is partly arbitrary. Bulk discounts on materials and overtime at high output bend the cost lines, so the straight-line chart holds only over the normal range of output.

Software and digital products

Building the product is the main cost, and selling one more download or subscription costs almost nothing, so contribution per unit is close to the price. Break-even depends almost entirely on fixed costs and price; once they are covered, profit grows quickly, and if sales fall short, the losses are large.

Start-ups

A business plan usually shows the break-even quantity beside the sales forecast, because lenders and investors want to see how far the forecast could miss before the business makes a loss. For a new business with no sales history, the margin of safety is the most telling figure in the plan, and the least certain.

Charities and social enterprises

A charity planning a fundraising dinner sets a ticket price that covers the venue, which is fixed, and the catering for each guest, which is variable, before it raises anything for the cause. The target price and target profit output answer how much to charge and how many tickets to sell to raise a given sum.

For each stakeholder

Owners and entrepreneurs

Use the break-even quantity and margin of safety to judge how much risk the business carries and whether a target profit is within reach. An owner who borrows to expand raises fixed costs and the break-even point, so the decision to grow is also a decision to carry more risk.

Banks and investors

Read the margin of safety as a measure of how far the forecast could be wrong before the loan or investment is in danger. A thin margin can mean a refused loan, a higher interest rate or a demand for more of the owners' own money.

Employees

Lowering the break-even point often means cutting costs, and labour is a large cost, so pay, hours or jobs can be at risk. Automation turns variable labour costs into fixed machine costs, which can raise profit at high output but leaves fewer jobs and more risk when sales fall.

Customers

A price rise lowers the break-even quantity, and customers pay for it; cheaper materials lower the variable cost, and customers may notice the difference in quality. Their response to price is the figure break-even analysis cannot supply.

Suppliers

A business trying to lower its variable cost presses suppliers for lower prices or bulk discounts, which shifts the squeeze onto them. Bulk deals tie both sides in, since the business must order enough to qualify and the supplier must keep its price.

Managers and sales teams

Targets are often set from the target profit output, so sales staff feel the effect of every change in price or cost. A target above capacity, or above what the market will buy, demoralizes the team and cannot be met, however hard it sells.

Section 10: Evaluation and limits

What to weigh before reaching a judgement.

  • Break-even analysis is most useful as a planning tool before money is spent, such as for a start-up, a new product or a proposed price change. It is less useful for running a complex business with many products and changing costs.
  • Its answers are only as reliable as its inputs. Fixed and variable costs are usually known, but the sales forecast behind the margin of safety is an estimate, and often the weakest figure in the analysis.
  • The straight-line assumption is reasonable over the range of output a business normally works in, but not far beyond it, where bulk discounts, overtime and new premises bend or step the lines.
  • For a price change, break-even shows what must be sold, not what will be sold. Judging whether profit will rise needs evidence of how customers respond to price.
  • Breaking even is about profit, not cash. A business above its break-even point can still run short of cash if customers pay late or stock builds up, which is why break-even analysis is used alongside a cash flow forecast.
  • In an examination, work out contribution per unit first, round break-even and target outputs up, give units with every answer, and interpret each result in the case, for example by checking whether a target output is within capacity.

Section 11: Make the decision

Use the ideas on a business choice: weigh the options, decide, and say what would change your mind.

Decision brief · a fictional business

Machines, price or marketing?

Tarnbeck Bottles sells 3,000 bottles a month at $25, with a variable cost of $15 a bottle and fixed costs of $20,000 a month, so it breaks even at 2,000 bottles, has a margin of safety of 1,000 bottles and makes a profit of $10,000. Its workshop can make 4,000 bottles a month. Ines Tarnbeck wants a higher profit, and has three proposals.

  1. Automate the filling and lidding

    Leasing a machine adds $6,000 a month to fixed costs, making $26,000, but cuts the variable cost to $12 a bottle. Contribution rises to $13, so break-even stays at 2,000 bottles, and profit at 3,000 bottles rises to $13,000.

  2. Cut the price to $23

    The sales manager expects sales to rise to 3,600 bottles a month. Contribution falls to $8, so break-even rises to 2,500 bottles. At 3,600 bottles profit is $8,800 and the margin of safety 1,100 bottles, 30.6% of sales.

  3. Market harder and buy steel in bulk

    A campaign costing $2,000 a month aims to lift sales to 3,500, the level at which the steel supplier cuts the variable cost to $14. Break-even is 2,000 bottles and, at 3,500 bottles, profit is $16,500 with a margin of safety of 42.9%. If sales stay at 3,000, the discount is lost and profit falls to $8,000.

How to weigh the options

Start from contribution, then ask what each option assumes about sales.

Automation changes the shape of Tarnbeck's costs rather than its break-even point: both cost structures break even at 2,000 bottles, but for every bottle sold above 2,000 the automated workshop earns $3 more, and for every bottle below it, it loses $3 more. At 2,500 bottles it earns $6,500 against $5,000 today; at 1,500 bottles it loses $6,500 against $5,000. It suits a business whose sales are steady and comfortably above break-even.

The price cut looks worst on paper: lower profit, a higher break-even point and a thinner margin of safety. To match today's $10,000 at $23, Tarnbeck would need 3,750 bottles a month, a quarter more than now. But the fair comparison is not with today; it is with what happens if the rival's cheaper bottle takes customers and Tarnbeck does nothing. If sales at $25 fell to 2,400 bottles, profit would fall to $4,000, and the price cut's $8,800 would look much better.

The campaign offers the most, but rests on two uncertain things at once, the campaign working and the steel discount following from it. If it fails, Tarnbeck is $2,000 a month worse off than today. Break-even analysis also assumes that every bottle made is sold, so buying steel for 3,500 bottles before the sales arrive risks building stock.

A strong judgement depends on the evidence about demand: market research or past results on how customers respond to price and promotion, and on how much the rival is really taking. Automation is the lowest-risk way to more profit if sales are stable; the price cut is a defensive move that makes sense only if the rival is winning customers; the campaign is the bet with the highest reward. Say which evidence would change your choice.

Section 12: Exam-style practice

Original questions written by the platform in the style of the papers, with what a strong response does. They are not IB questions and the guidance is not an official markscheme.

  1. Question 1 Distinguish 4 marks Paper 2 style Original practice

    Wickham Candles, a fictional maker of scented candles, sells 1,900 candles a month at $16 each. Each candle has a variable cost of $6.50, fixed costs are $11,400 a month, and the workshop can make 2,500 candles a month.

    Distinguish between contribution per unit and total contribution, using Wickham Candles as an example.

    What a strong response does

    A strong response defines both, shows how each is calculated with Wickham's figures, and says what each is used for.

    • Contribution per unit is the selling price minus the variable cost of one unit: $16 − $6.50 = $9.50, what each candle adds towards fixed costs and then profit.
    • Total contribution is contribution per unit times the number sold: $9.50 × 1,900 = $18,050 a month, what all the sales add together.
    • The difference in use: contribution per unit finds how many units are needed to break even or reach a target; total contribution, minus the fixed costs of $11,400, gives the profit, here $6,650 a month.
  2. Question 2 Calculate 4 marks Paper 2 style Original practice

    Using the figures in question 1, calculate Wickham's break-even quantity and its margin of safety, in units and as a percentage of sales.

    What a strong response does

    A strong response writes each formula, shows the working and gives the units.

    • Break-even quantity = fixed costs ÷ contribution per unit = 11,400 ÷ 9.50 = 1,200 candles a month.
    • Margin of safety = 1,900 − 1,200 = 700 candles, or 700 ÷ 1,900 × 100 = 36.8% of sales.

    Sales could fall by more than a third before Wickham made a loss.

  3. Question 3 Construct 5 marks Paper 2 style Original practice

    Construct a fully labelled break-even chart for Wickham Candles, from zero output to its capacity of 2,500 candles a month, and show the break-even point and the margin of safety at its current sales.

    What a strong response does

    A strong response works out the points first, chooses sensible scales and labels everything.

    • Axes: output in candles a month on the horizontal axis, from 0 to 2,500; costs and revenue in dollars on the vertical axis, from 0 to at least $40,000.
    • Fixed costs: a horizontal line at $11,400.
    • Total costs: from $11,400 at zero output to 11,400 + (2,500 × 6.50) = $27,650 at 2,500 candles.
    • Total revenue: from $0 at zero output to 2,500 × 16 = $40,000 at 2,500 candles.
    • Break-even point: where total revenue crosses total costs, at 1,200 candles and $19,200 of revenue (1,200 × $16), labelled on both axes.
    • Margin of safety: the horizontal distance from 1,200 to 1,900 candles, labelled as 700 candles. At 1,900 candles the vertical gap between total revenue ($30,400) and total costs ($23,750) is the profit of $6,650.

    A title and labels on every line and both axes complete the chart.

  4. Question 4 Calculate 4 marks Paper 2 style Original practice

    Wickham's owner wants a profit of $9,500 a month. Calculate the target profit output at the current price, and the target price at the current sales of 1,900 candles.

    What a strong response does

    A strong response writes both formulas and checks the results against capacity.

    • Target profit output = (fixed costs + target profit) ÷ contribution per unit = (11,400 + 9,500) ÷ 9.50 = 2,200 candles a month, within the capacity of 2,500.
    • Target price = ((fixed costs + target profit) ÷ expected sales) + variable cost per unit = (20,900 ÷ 1,900) + 6.50 = 11.00 + 6.50 = $17.50.

    Check: 1,900 × ($17.50 − $6.50) − $11,400 = $9,500. Whether customers would buy 1,900 candles at $17.50 is a question break-even analysis cannot answer.

  5. Question 5 Analyse 6 marks Paper 2 style Original practice

    The price of wax rises, so the variable cost of a candle rises from $6.50 to $7.50. Analyse the effect on Wickham's break-even quantity, profit and margin of safety, if price and sales stay the same.

    What a strong response does

    A strong response recalculates from contribution, compares each result with the original and explains what it means for Wickham.

    • Contribution per unit falls from $9.50 to $16 − $7.50 = $8.50.
    • Break-even quantity rises from 1,200 to 11,400 ÷ 8.50 = 1,341.2, rounded up to 1,342 candles.
    • Profit at 1,900 candles falls from $6,650 to (1,900 × 8.50) − 11,400 = $4,750, a fall of $1,900, a dollar on every candle sold.
    • Margin of safety falls from 700 to 1,900 − 1,342 = 558 candles, or 29.4% of sales.
    • On the chart, the total cost line pivots upwards from the same point on the vertical axis, so it crosses total revenue further to the right.
    • What follows: Wickham could raise its price, look for cheaper wax or accept the lower profit. A price of $17 would restore the contribution of $9.50, but only if sales held at that price.
  6. Question 6 Evaluate 10 marks Paper 2 style Original practice

    Wickham Candles is considering cutting its price to $14 for all customers, expecting sales to rise to 2,400 candles a month. Evaluate the usefulness of break-even analysis in making this decision.

    What a strong response does

    A strong response uses break-even figures to show what the analysis can tell the owner, then weighs what it cannot, and reaches a judgement.

    • What it shows: at $14, contribution falls to $7.50 and break-even rises from 1,200 to 11,400 ÷ 7.50 = 1,520 candles. At 2,400 candles, profit would be (2,400 × 7.50) − 11,400 = $6,600, slightly less than the current $6,650, with a margin of safety of 880 candles. To keep today's profit, Wickham would need (11,400 + 6,650) ÷ 7.50 = 2,406.7, rounded up to 2,407 candles, close to its capacity of 2,500.
    • So the price cut means much more work for no more profit, and almost no spare capacity, a clear warning that break-even analysis brings out quickly.
    • What it cannot show: whether sales would really rise to 2,400, which depends on how customers and rivals respond; break-even shows what must be sold, not what will be sold.
    • Its assumptions: a constant variable cost (bulk wax at higher output might lower it, and overtime near capacity might raise it), fixed costs that stay fixed near capacity, and every candle made being sold.
    • What else matters: a lower price may change how customers see the brand, may start a price war, and leaves little room for rush orders; it may still make sense if it wins customers who later buy other products.
    • Judgement: for example, that break-even analysis is very useful here because it shows quickly that the price cut does not pay at the expected volume, but the decision also needs market research on demand at $14 and a view on how rivals would react.

Section 13: Revision summary

The subtopic on one page: what to remember.

  • Contribution per unit = selling price − variable cost per unit; total contribution = contribution per unit × quantity sold; profit = total contribution − fixed costs.
  • Break-even quantity = fixed costs ÷ contribution per unit, rounded up to the next whole unit; break-even revenue = break-even quantity × price.
  • On a break-even chart, total revenue starts at the origin and total costs start at the fixed costs. They cross at the break-even point, with a loss to the left and a profit to the right.
  • Margin of safety = actual or forecast output − break-even quantity, often also given as a percentage of sales.
  • Target profit output = (fixed costs + target profit) ÷ contribution per unit; target price = ((fixed costs + target profit) ÷ expected sales) + variable cost per unit. Check both against capacity and demand.
  • A price change pivots the revenue line, a change in variable cost pivots the total cost line, and a change in fixed costs shifts the fixed and total cost lines in parallel. Start every recalculation from contribution per unit.
  • A higher price lowers the break-even quantity but may cut sales; break-even analysis shows what must be sold, not what will be sold.
  • It assumes that everything made is sold, that price and variable cost per unit are constant and that fixed costs stay fixed, and it suits one product and one period, so judge its answers against those assumptions.
  • The guide's formula list gives no break-even formulas, so write each standard form before substituting.

Section 14: The mindmap

Contribution, the break-even chart and its calculations, what happens when price or costs change, and why break-even is only a guide.

Mindmap: Break-even analysisContribution, the break-even chart and its calculations, what happens when price or costs change, and why break-even is only a guide. The same content follows as an outline.5.5Break-evenanalysisContributionƒContribution per unitContribution per unit = sellingprice per unit − variable cost perunitƒTotal contributionTotal contribution = contributionper unit × quantity soldProfit = total contribution− fixed costsPer unit: one more sale;total: all salesCalculationsƒBreak-even quantityBreak-even quantity = total fixedcosts ÷ contribution per unitƒMargin of safetyMargin of safety = actual orforecast output − break-evenquantityƒTarget profit outputTarget profit output = (totalfixed costs + target profit) ÷contribution per unitƒTarget priceTarget price = ((total fixed costs+ target profit) ÷ expected sales)+ variable cost per unitƒBreak-even revenueBreak-even revenue = break-evenquantity × selling price per unitThe break-even chart=Revenue and costs by outputFixed costs: a horizontal lineTotal costs: from fixed costsTotal revenue: starts at zeroLines cross at break-evenProfit right, loss leftShows margin of safety andtarget profitPrice or cost changesHigher price: revenue pivotsHigher variable cost: totalcost pivotsHigher fixed costs: totalcost shiftsProfit depends on salesShow it on a chart and bycalculationValue and limitations+Quick, simple and visual+Tests what-if changes,supports a plan−Assumes constant price andunit costs−Assumes all output is sold−Hard with several products−Fixed costs step up−Only as good as the data

Drag to move the map, or use the arrow keys. Click a branch to fold it away. Whole map shows all of it; zoom with the buttons, or with Ctrl and the scroll wheel.

  • Core ideas
  • Calculations
  • Tools
  • Applications
  • Evaluation
  • Advantage
  • Limitation
  • HL HL only
The map as an outline

Contribution

Core ideas
  • Formula Contribution per unit Contribution per unit = selling price per unit − variable cost per unit
  • Formula Total contribution Total contribution = contribution per unit × quantity sold Or total revenue minus total variable costs.
  • Profit = total contribution − fixed costs Break-even is where total contribution equals fixed costs.
  • Per unit: one more sale; total: all sales Use per unit to find break-even, total to find profit.

Calculations

Calculations
  • Formula Break-even quantity Break-even quantity = total fixed costs ÷ contribution per unit Round up to the next whole unit.
  • Formula Margin of safety Margin of safety = actual or forecast output − break-even quantity Can also be shown as a percentage of output.
  • Formula Target profit output Target profit output = (total fixed costs + target profit) ÷ contribution per unit
  • Formula Target price Target price = ((total fixed costs + target profit) ÷ expected sales) + variable cost per unit
  • Formula Break-even revenue Break-even revenue = break-even quantity × selling price per unit Not named in the guide; it follows from the break-even quantity.

The break-even chart

Tools

Price or cost changes

Applications
  • Higher price: revenue pivots Higher contribution per unit and lower break-even; the margin of safety grows if sales hold.
  • Higher variable cost: total cost pivots Lower contribution per unit, higher break-even, smaller margin of safety.
  • Higher fixed costs: total cost shifts A parallel shift; break-even rises and the margin of safety falls.
  • Profit depends on sales A higher price may lose customers; a lower one may win enough to raise profit.
  • Show it on a chart and by calculation Recalculate contribution per unit first, then the rest.

Value and limitations

Evaluation
  • Advantage Quick, simple and visual
  • Advantage Tests what-if changes, supports a plan Useful in a business plan or a loan application.
  • Limitation Assumes constant price and unit costs Bulk discounts and price cuts change both.
  • Limitation Assumes all output is sold
  • Limitation Hard with several products
  • Limitation Fixed costs step up Beyond capacity, more premises or machines are needed.
  • Limitation Only as good as the data The sales forecast is usually the weakest input.

Open the mindmap on its own page, with its terms and connections.

Section 15: Key terms

Defined in the platform's own words. Each opens its full entry.

Break-even analysis
A planning tool that compares a business's costs and revenues at different levels of output, to find the output at which it makes neither a profit nor a loss and to see how profit changes with sales.
Break-even chart
A graph of total revenue and total costs, with fixed costs shown, against output; the break-even point is where the total revenue and total cost lines cross.
Break-even quantity
The level of output at which total revenue equals total cost, found by dividing fixed costs by contribution per unit and rounding up to a whole unit.
Break-even revenue
The sales revenue a business needs in a period to cover all its costs exactly, so that it makes neither a profit nor a loss.
Contribution
What a unit, or a decision, adds towards fixed costs and then profit. Contribution per unit is the selling price minus the variable cost per unit.
Contribution per unit
The amount each unit sold adds towards paying the fixed costs and then towards profit: its selling price minus its variable cost.
Margin of safety
The amount by which actual or forecast output exceeds the break-even quantity, measured in units or as a share of sales.
Target price
The selling price per unit a business needs to charge to reach a target profit, given its costs and the quantity it expects to sell.
Target profit
The profit a business sets out to make in a period, which break-even analysis uses to work out the output or the price needed to reach it.
Target profit output
The level of output needed to earn a chosen profit, found by dividing fixed costs plus the target profit by contribution per unit.
Total contribution
The contribution earned from all the units sold in a period: what is left of sales revenue after paying the variable costs, available to cover fixed costs and then provide profit.

Section 17: Check your recall

Answer from memory, then reveal and rate yourself. Your ratings stay on this device.

Answer each question from memory, out loud or on paper, before you reveal the answer. Your ratings also schedule these questions in your flashcards.

  1. What is the difference between contribution per unit and total contribution?

    Contribution per unit is the price minus the variable cost of one unit, what one more sale adds. Total contribution is contribution per unit times the number sold (or total revenue minus total variable costs), what all the sales add towards fixed costs and profit.

    How well did you recall it?
  2. Fixed costs are $12,000 a month, the price is $8 and the variable cost is $5 a unit. What is the break-even quantity?

    12,000 ÷ (8 − 5) = 4,000 units a month.

    How well did you recall it?
  3. Why is a break-even quantity that is not a whole number rounded up?

    Because one unit fewer would leave a small loss, so the business must sell the next whole unit to cover all its costs.

    How well did you recall it?
  4. The same business sells 5,000 units a month. What is its margin of safety?

    5,000 − 4,000 = 1,000 units, or 1,000 ÷ 5,000 × 100 = 20% of sales.

    How well did you recall it?
  5. How does a rise in fixed costs appear on a break-even chart, and what happens to the break-even quantity?

    The fixed cost and total cost lines shift up in parallel and the revenue line does not move, so they cross further to the right. The break-even quantity rises, and at unchanged sales the margin of safety and profit fall.

    How well did you recall it?
  6. A price rise lowers the break-even quantity. Why might profit still fall?

    Customers may buy fewer units at the higher price. If sales fall far enough, the extra contribution on each unit does not make up for the units lost.

    How well did you recall it?
  7. How is the target price worked out?

    Add the fixed costs and the target profit, divide by the expected sales, then add the variable cost per unit.

    How well did you recall it?
  8. Give three limitations of break-even analysis.

    For example, it assumes everything made is sold, that price and variable cost per unit stay constant, and that fixed costs stay fixed; it is hard to apply to several products; and it is only as good as the sales forecast.

    How well did you recall it?

Reveal and rate each card.

Section 18: How it connects

Where 5.5 meets the rest of the course: worked connections with an exam-style question on each, then the further links the notes name.

  1. With 3.3 Costs and revenues

    Costs and revenue are break-even's raw material

    Break-even analysis rests on the classification of costs in 3.3. Fixed costs must be paid whatever the output; variable costs rise with each unit made; and the difference between the price and the variable cost per unit is the contribution each sale makes, first towards fixed costs and then towards profit. The break-even quantity is fixed costs divided by contribution per unit. A cost classified wrongly, such as one that is partly fixed and partly variable treated as wholly fixed, gives a wrong break-even point, and every decision based on it inherits the error.

    Exam-style question Source: Original practice question Command term: Calculate (AO4)

    A café has fixed costs of $6,000 a month. It sells coffee at $4.00 a cup, and the variable cost of each cup is $1.50. Calculate the café's break-even quantity per month. [2 marks]

    The worked answer

    Contribution per unit = $4.00 − $1.50 = $2.50. Break-even quantity = $6,000 ÷ $2.50 = 2,400 cups a month.

  2. With 4.5 The seven Ps of the marketing mix

    Price changes and break-even

    Price is one of the seven Ps and also one of the inputs to break-even analysis. A higher price raises the contribution per unit, so fewer units are needed to cover fixed costs and the break-even quantity falls; a lower price does the opposite. Break-even analysis shows that effect exactly, but it cannot say how customers will respond: if a price rise loses more sales than it saves in break-even units, the margin of safety shrinks. At HL, price elasticity of demand helps to judge that response.

    Exam-style question Source: Original practice question Command term: Calculate (AO4)

    A bakery has fixed costs of $6,300 a month and sells loaves at $3.00, with a variable cost of $1.20 a loaf. It raises its price to $3.30, and the variable cost does not change. Calculate the change in the bakery's break-even quantity. [4 marks]

    The worked answer

    Before, contribution per unit = $3.00 − $1.20 = $1.80, so break-even = $6,300 ÷ $1.80 = 3,500 loaves. After, contribution per unit = $3.30 − $1.20 = $2.10, so break-even = $6,300 ÷ $2.10 = 3,000 loaves. Break-even falls by 500 loaves a month.

Also linked in the notes

  • 3.7 Cash flow Break-even is about profit; cash flow is about timing, and a business needs both.
  • 4.3 Sales forecasting Testing a forecast's low case against the break-even quantity shows whether a plan keeps a margin of safety.
  • 4.4 Market research Market research estimates the sales a price will achieve, the figure break-even analysis cannot supply.
  • 5.4 Location Each site's fixed and variable costs give it its own break-even point, a useful comparison between locations.
  • 5.6 Production planning At HL, capacity limits the output any target can ask for, operating leverage builds on contribution and the margin of safety, and contribution also drives the choice between making and buying.

See 5.5 on the course connections map, with every link drawn across the five units.

Section 19: Connected learning

Everything else on the platform that teaches, applies or tests 5.5, each labelled by its standing.

Revise
Practise
Cases
Decisions and simulations
Frameworks
Tools
  • 11 tools for 5.5 In Tools and practice on this page: Finance Desk, Financial Laboratory, Operations Floor, Entrepreneurship and Innovation Lab, Advanced financial analysis
Boardroom Briefings
Advanced Management
Course connections

Notes checked against: Business management guide, first assessment 2024 (published February 2022, updated May 2022), pp. 34 (The four content statements and their assessment objectives; the formula list on pp. 64 to 65 has no break-even formulas); Business Management for the IB Diploma, pp. 511 to 518 (The end of the chapter (its opening pages were not supplied), read to check coverage; nothing reproduced); Business management teacher support material, pp. 86 (The glossary's definition of the margin of safety, checked). Updated 2026-11-03. The IB guide is the authority on the course.