Unit 3: Finance and accounts
3.6 Efficiency ratio analysis
HL This subtopic is HL only. You are viewing SL content, so treat this page as extension material; switch to HL to set it as part of your course.
Study mode could not start. The page reads as usual.
Study mode
On this page
Section 01: What the IB course asks
The content statements for 3.6, in the platform's words, with the depth of teaching the guide sets (guide, from p. 29).
- Efficiency ratios: stock turnover, debtor days, creditor days and gearing ratio AO2, AO4
- Strategies to improve the efficiency ratios AO3
- Insolvency versus bankruptcy AO2
AO1 knowledge and understanding · AO2 application and analysis · AO3 synthesis and evaluation · AO4 a range of skills. A question can use a command term at its statement's level or below. The whole course.
Section 02: Why it matters
Two businesses can make the same profit and be in very different health. One sells its stock in a month, collects from customers in thirty days and borrows little; the other holds stock for a quarter, waits two months to be paid and relies on loans. The first has cash to spare; the second may struggle to pay its bills. Efficiency ratios measure these differences: how well a business manages its stock, its customers' credit, its suppliers' credit and its long-term finance.
This HL subtopic adds four ratios to the profitability and liquidity ratios of 3.5: stock turnover, debtor days, creditor days and the gearing ratio. You need to calculate each from the accounts with the guide's formulas, explain what the result shows, evaluate strategies to improve it, and distinguish insolvency from bankruptcy, the two words for what happens when a business cannot pay what it owes.
By the end you can
- Calculate stock turnover (in times and in days), debtor days, creditor days and the gearing ratio from a set of final accounts, using the guide's formulas.
- Comment on each ratio by comparing it with earlier years, with similar businesses and with credit terms, and explain what it shows about the business.
- Analyse how the efficiency ratios help to explain changes in liquidity and profitability.
- Evaluate strategies to improve each efficiency ratio, weighing what each one costs and who bears the cost.
- Distinguish between insolvency and bankruptcy, and explain why a profitable business can become insolvent.
Section 03: What efficiency ratios show
The guide's efficiency ratios measure how well a business manages four things: its stock, the credit it gives customers, the credit it takes from suppliers and the mix of borrowing and owners' money in its long-term finance. The first three concern working capital, the day-to-day cycle in which cash buys stock, stock is sold, often on credit, and customers' payments become cash again. The fourth concerns financial risk.
These ratios matter because they explain the other ratios. Profit is earned when goods are sold, but cash arrives only when customers pay, and cash leaves when suppliers are paid. Stock that sits on shelves and customers who pay late tie up cash that the business could use, so a business can be profitable and short of cash at the same time. High gearing adds interest that must be paid whatever profit is made. When a liquidity ratio worsens, the efficiency ratios often show why.
Like every ratio, they mean little alone. Compare them with the same business in earlier years, with similar businesses in the same industry, and with benchmarks such as the credit terms the business offers its customers. The diagram shows the formulas, which candidates receive in the examination, so the marks go to choosing the right figures, showing the working and explaining the result.
- Stock turnover
How quickly stock is used or sold, as the number of times average stock is replaced in a year or the average number of days stock is held.
- Debtor days
How many days, on average, customers take to pay what they owe.
- Creditor days
How many days, on average, the business takes to pay its suppliers.
- Gearing ratio
The share of capital employed, the long-term finance, that comes from borrowing rather than from the owners.
- Gearing is not usually called an efficiency ratio
The guide groups the gearing ratio with the efficiency ratios. In most accounting and finance writing it is a solvency or financial structure ratio, because it measures risk rather than how well resources are used. Use the guide's grouping in the examination, and know that other sources differ.
Text description
Three families of ratios with the guide’s formulas. Profitability: gross profit margin is gross profit divided by sales revenue times 100; profit margin is profit before interest and tax divided by sales revenue times 100; return on capital employed is profit before interest and tax divided by capital employed times 100. Liquidity: the current ratio is current assets divided by current liabilities; the acid test ratio is current assets minus stock, divided by current liabilities. Efficiency, for HL: stock turnover in times is cost of sales divided by average stock, or in days average stock divided by cost of sales times 365; debtor days are debtors divided by total sales revenue times 365; creditor days are creditors divided by cost of sales times 365; the gearing ratio is non-current liabilities divided by capital employed times 100. Capital employed is non-current liabilities plus equity, and average stock is opening plus closing stock divided by two.
Section 04: Stock turnover
Stock turnover measures how quickly a business uses up or sells its stock. The guide gives two versions, which tell the same story from different angles. In number of times, it shows how often the business uses up and replaces its average stock in a year: a higher figure means faster turnover. In number of days, it shows how long, on average, stock is held before it is sold or used: a lower figure means faster turnover. Both use cost of sales, not sales revenue, because stock is valued at cost, and both use average stock, the mean of the opening and closing figures, because the stock held changes through the year.
Faster turnover is usually better. Less cash is tied up in stock, storage and insurance cost less, and there is less risk that goods spoil, go out of fashion or become obsolete before they sell. A slowing turnover is a warning that stock is building up, perhaps because sales have fallen, the business has bought too much, or some lines are not selling.
What counts as fast depends entirely on the product. A bakery or florist turns its stock over every few days; a furniture or jewellery shop may hold stock for months. Very fast turnover is not always good either, since a business that holds too little risks running out and losing sales. And the ratio means little for businesses that hold little stock, such as consultancies and many service firms.
Stock turnover (number of times)
Stock turnover (number of times) = cost of sales ÷ average stock
Guide, p. 64. The answer is a number of times a year, not a percentage.
Stock turnover (number of days)
Stock turnover (number of days) = (average stock ÷ cost of sales) × 365
Guide, p. 64. Dividing 365 by the number of times gives the same answer.
Average stock
Average stock = (opening stock + closing stock) ÷ 2
Guide, p. 64. If a question gives only one stock figure, say that you have used it in place of the average.
Section 05: Debtor days and creditor days
Debtor days show how long, on average, customers take to pay. Fewer days means cash arrives sooner. The most useful comparison is with the credit terms the business offers: if customers are given 30 days and debtor days are 45, they are paying two weeks late on average, and the business should ask who is late and why. Rising debtor days are also a warning of bad debts, money that will never be paid.
Creditor days show how long, on average, the business takes to pay its suppliers. More days means the business keeps its cash for longer, so a rise helps liquidity, but only up to a point. Paying later than agreed can lose discounts for prompt payment, damage relationships and lead suppliers to shorten their terms or demand cash on delivery. A sudden rise can be a sign of distress rather than good management: the business may be paying late because it cannot pay on time.
Read the two together. A business whose customers pay faster than it pays its suppliers is partly financed by its suppliers, which helps its cash flow; one that pays suppliers quickly but waits a long time for its customers is financing them. Two quirks of the guide's formulas matter when you comment. Debtor days divide by total sales revenue, including cash sales, so for a business that sells mostly for cash, such as a shop, the ratio understates how long its credit customers take. Creditor days divide by cost of sales, which is only an approximation of what was bought on credit.
- Debtor days rising
Customers are paying more slowly, credit control has weakened, or the business has offered longer credit to win sales. Cash is tied up, and the risk of bad debts grows.
- Creditor days rising
The business is taking longer to pay. It may have negotiated better terms, which is good for cash, or it may be short of cash and stretching its suppliers, which is a warning.
- The cash cycle
Stock days plus debtor days minus creditor days gives roughly how long cash is tied up between paying suppliers and being paid by customers. This combination is enrichment beyond the guide, but it shows how the three ratios work together.
Debtor days
Debtor days ratio (number of days) = (debtors ÷ total sales revenue) × 365
Guide, p. 64.
Creditor days
Creditor days ratio (number of days) = (creditors ÷ cost of sales) × 365
Guide, p. 64. Creditors means trade creditors, the suppliers waiting to be paid.
Section 06: The gearing ratio
The gearing ratio shows how much of a business's long-term finance is borrowed. It divides non-current liabilities, mainly long-term loans, by capital employed, which the guide defines as non-current liabilities plus equity. A business with a gearing ratio of 40% has borrowed 40 cents of every dollar of its long-term finance; the owners have provided the other 60.
Borrowing is not bad in itself. Interest is often cheaper than the return owners expect, and a loan lets a business grow without the owners giving up control by selling shares. When the business earns a return on its capital above the interest rate on its loans, borrowing raises the return to the owners. But interest and repayments must be paid whatever happens to profit, so a highly geared business is more exposed when sales fall or interest rates rise, and lenders may refuse it further credit or charge more for it.
A common rule of thumb treats gearing above 50% as high and below 25% as low. This is not an IB rule, and what is safe depends on how stable the business's profits and cash flows are. A utility with steady income can carry more debt than a fashion retailer whose sales swing with the seasons.
Gearing ratio
Gearing ratio = (non-current liabilities ÷ capital employed) × 100
Guide, p. 64.
Capital employed
Capital employed = non-current liabilities + equity
Guide, p. 64. The same definition as in ROCE (3.5).
Advantages
- Low gearing means less interest to pay, less risk if profits fall or interest rates rise, and more room to borrow if an opportunity or a crisis comes.
- High gearing lets a business grow faster than its owners could fund alone, without diluting their control.
- When returns exceed the interest rate, higher gearing raises the return to the owners.
Limitations
- High gearing commits the business to interest and repayments whatever its profits, and makes it vulnerable to rising interest rates.
- Highly geared businesses find it harder and dearer to borrow more, and lenders may impose conditions.
- Very low gearing can mean missed opportunities, or owners putting in more money than the business needs.
- The ratio uses values from one date, and overdrafts and other short-term borrowing count as current liabilities, so a business that relies on them can look less geared than it is.
Section 07: Reading the ratios together: Tidewater
A question will often give you two years of accounts and ask you to calculate and comment. A steady routine earns the marks: write each formula, substitute the figures, give the answer to two decimal places with its unit (times, days or a percentage), then explain what the change shows and why it matters for the business in the case. The final step, linking the ratios into one story, is what separates a strong answer from a list.
Tidewater's results, in 2025 and then 2026:
- Stock turnover: 5.69 times and 5.38 times; 64.12 days and 67.79 days.
- Debtor days: 23.90 days and 20.86 days.
- Creditor days: 44.39 days and 55.62 days.
- Gearing: 22.86% and 40.98%.
The story they tell answers the owners' three questions. Stock is building up: the slower turnover, and especially the year-end jump, means cash is sitting in the stockroom. Customers are not the problem: debtor days are low and falling. Suppliers are funding the gap: Tidewater is paying about eleven days later, which kept cash in the business but cannot be stretched much further. And the loan has raised the risk: gearing has nearly doubled while profit fell. Together these explain the weaker acid test ratio found in 3.5: stock has risen, cash has fallen, and the business is leaning on its suppliers and its bank. To practise on another set of accounts, the ratio desk works every ratio for a fictional distribution company and lets you test strategies.
Section 08: Strategies to improve the efficiency ratios
The guide sets the strategies at AO3, so each needs weighing, not just naming. Every strategy below has a cost, a risk or a stakeholder who loses, and the right choice depends on what caused the weak ratio. "Improve" also needs care: for stock turnover and debtor days, improving means faster; for creditor days, a rise helps cash but strains suppliers; and for gearing, lower is safer, though not always better.
A strategy can also help one ratio and harm another. Clearing stock with discounts speeds up stock turnover but cuts the gross profit margin; paying suppliers sooner to win their goodwill lowers creditor days and the cash balance; repaying a loan from cash lowers gearing but weakens liquidity. Look at the whole set of accounts before recommending anything. The options below are common ones, not a list the guide prescribes.
- Speed up stock turnover
Order smaller quantities more often, move towards just-in-time supply (5.6), clear slow-moving lines with discounts, cut the range to the lines that sell, and forecast sales more accurately (4.3). Costs: more risk of running out and losing sales, the loss of bulk-buying discounts, more frequent deliveries, and lower margins on discounted stock.
- Reduce debtor days
Check customers' creditworthiness before giving credit, set credit limits, invoice promptly, chase late payers, offer a discount for early payment, shorten credit terms, or sell the debts to a factor (debt factoring). Costs: customers may move to rivals that offer easier credit, discounts and factors' fees reduce profit, and pressing customers can damage relationships.
- Raise creditor days
Negotiate longer credit terms with suppliers, make full use of the credit already offered, or move to suppliers with better terms. Costs: lost discounts for prompt payment, strained relationships, the risk that suppliers demand payment in advance or put the business's orders last, and an ethical question when a large business makes small suppliers wait.
- Reduce gearing
Issue new shares, retain more profit instead of paying dividends, repay loans from cash, or sell assets and use the proceeds to repay debt (sale and leaseback is one way). Costs: new shares dilute the owners' control and their share of profit, lower dividends disappoint shareholders, repaying debt drains cash, and selling assets can leave the business paying rent for what it used to own.
Section 09: Insolvency versus bankruptcy
The two words are often used as if they meant the same thing, but they describe different stages. Insolvency is a financial state: a person or business cannot pay its debts. Bankruptcy is a legal process that may follow: a court becomes involved in dealing with debts that cannot be paid.
Insolvency has two senses. In the first, a business cannot pay its debts as they fall due, because it lacks the cash, even if it owns valuable assets. In the second, its liabilities are greater than its assets, so even selling everything would not pay what it owes. Either way, it cannot meet its obligations. Insolvency need not be the end: a business may recover by raising new finance, selling assets, agreeing more time to pay with its creditors, or being bought.
If it cannot recover, creditors may go to court, or the business may apply itself. Bankruptcy proceedings then deal with the debts under the court's supervision, either by restructuring them so that the business can carry on, or by selling its assets to repay creditors as far as possible. For a company, the sale of all its assets and its closure is called liquidation. The words and procedures differ between countries: in some, bankruptcy applies only to individuals, including sole traders, and an insolvent company goes through other procedures with other names. For the examination, the distinction to make is between being unable to pay (insolvency) and the legal process that may follow (bankruptcy).
- A profitable business can be insolvent
Profit is not cash (3.7). A business can sell at a profit and still run out of cash if customers pay late, stock piles up, it grows faster than its cash allows, or a loan falls due.
- Warning signs in the ratios
Slowing stock turnover, rising debtor days, creditor days that rise because bills are being paid late, falling liquidity ratios and high gearing with falling profit. No single ratio proves insolvency is coming, but together they show pressure building.
- Who loses
In bankruptcy, creditors are paid in an order set by law, and many receive only part of what they are owed. A sole trader or partner, with unlimited liability, can lose personal possessions; shareholders in a limited company lose at most what they invested, which is often everything.
Section 10: In practice: industries and stakeholders
The same ideas look different from one industry to the next, and land differently on each group with a stake in the business.
Across industries
- Supermarkets and retail
Food retailers turn their stock over in days, are paid at the till so their debtor days are close to zero, and often pay suppliers after several weeks. Their customers effectively pay them before they pay their suppliers, which frees cash for expansion but puts the burden on suppliers, especially small ones.
- Manufacturing
Manufacturers hold raw materials, work in progress and finished goods, so stock turnover is slower, and they usually sell on credit to other businesses, so debtor days of 30 to 60 are normal. Machinery is often bought with long-term loans, which raises gearing, and just-in-time supply is the main way to speed up stock turnover.
- Construction
Builders are often paid in stages, sometimes only when a project is finished, so debtor days are long and cash flow is lumpy, while subcontractors and suppliers want paying monthly. That gap is one reason construction firms become insolvent more often than many others, even with full order books.
- Hospitality
Restaurants and hotels turn food stock over within days, since it is perishable, and most customers pay at once, so debtor days are low. Their main efficiency risk is gearing: hotels in particular are often financed with large loans secured on the building, so a fall in bookings quickly squeezes their ability to pay interest.
- Technology and software
Software firms hold little or no stock, so stock turnover means little, and customers on subscriptions often pay in advance. Their key ratio is usually debtor days on contracts with large business customers, who may take months to pay, and many young technology firms have low gearing because they are funded by investors' equity rather than loans.
For each stakeholder
- Managers
Managers use the ratios to control working capital, setting targets for stock levels, credit terms and payment of suppliers. They face trade-offs between departments, since sales staff want generous credit and plenty of stock to sell from, while the finance team wants both kept low.
- Suppliers
Creditor days measure how long suppliers wait for their money. A business that stretches its suppliers improves its own cash at their expense, and suppliers, especially small ones, may respond by shortening terms, raising prices or refusing to supply, a direct conflict of interest.
- Banks and other lenders
Lenders watch gearing and liquidity before lending and often set conditions, such as a maximum gearing ratio, in loan agreements. A business that breaks them may face higher interest or demands for repayment, so lenders' interests can push managers towards cutting stock and debt quickly.
- Owners and shareholders
Gearing affects both their risk and their return. Borrowing can raise their returns and keep their control, but it raises the risk of insolvency, in which shareholders are paid last. Reducing gearing by issuing shares protects the business but dilutes existing owners.
- Customers
Customers benefit from generous credit terms and from stock being available when they want it, so tighter credit control and leaner stock can push them to rivals. Business customers may resist shorter credit terms most strongly, since it affects their own cash flow.
- Employees
Employees rarely see the ratios, but they bear the consequences of insolvency, which can cost them their jobs and, in some cases, unpaid wages. Working capital problems can also lead to cost-cutting, such as frozen pay or hiring, before a crisis is visible.
Section 11: Evaluation and limits
What to weigh before reaching a judgement.
- The ratios are only as reliable as the accounts behind them. The statement of financial position shows a single day, which may be unrepresentative for a seasonal business, and figures can be window-dressed, for example by delaying purchases before the year end. The guide's use of average stock smooths some of this, but not all.
- Comparisons must be like with like. Normal stock turnover, debtor days and gearing differ enormously between industries, so compare a business with its own past and with similar businesses, not with a general standard.
- The guide's formulas are approximations. Debtor days use total sales revenue, including cash sales, and creditor days use cost of sales rather than credit purchases, so treat the results as indicators and compare them on the same basis each year.
- Higher or lower is not always better. Very fast stock turnover can mean lost sales from empty shelves, very low debtor days can mean refusing credit that customers expect, high creditor days can mean a business in distress, and low gearing can mean missed opportunities. Judge each ratio against the business's strategy and circumstances.
- Ratios show symptoms, not causes. They point to where to look, such as at the new store's stock or the late payment of suppliers, but explaining why needs other evidence: the market, management decisions and the business's plans.
- Insolvency is about cash, not profit. The efficiency ratios are valuable because they show cash pressure building before it becomes a crisis, but only if managers act on them; a profitable business that ignores them can still fail.
Section 12: Make the decision
Use the ideas on a business choice: weigh the options, decide, and say what would change your mind.
Decision brief · a fictional business
Penwarden's cash squeeze
Penwarden Supplies, a fictional wholesaler of catering equipment to restaurants and hotels, sells everything on credit with 30-day terms. Its overdraft is close to its limit. Its accounts show sales revenue of $7,300,000, cost of sales of $5,110,000, debtors of $1,400,000, trade creditors of $420,000, average stock of $840,000, non-current liabilities of $1,200,000 and equity of $2,800,000.
Its ratios: debtor days (1,400,000 ÷ 7,300,000) × 365 = 70 days; creditor days (420,000 ÷ 5,110,000) × 365 = 30 days; stock turnover 6.08 times, or 60 days; gearing 1,200,000 ÷ 4,000,000 × 100 = 30%. Each day of debtor days ties up $20,000, so customers paying 40 days beyond the terms tie up $800,000. The finance director has three proposals.
How to weigh the options
Begin with the cause. Penwarden is profitable enough; its problem is that customers take 70 days to pay on 30-day terms, while Penwarden pays its own suppliers in 30. It is, in effect, lending $800,000 to its customers, financed by an overdraft.
Option C is the cheapest each year and the quickest to arrange, but it treats the symptom, not the cause. The debtors stay at 70 days, gearing rises from 30% to 39.13%, and if customers pay even later the cash problem returns with a loan on top. Option A raises the most cash fastest and transfers the work of collecting to the factor, but it is the most expensive at about $109,500 a year, it reduces profit permanently, and restaurants and hotels used to dealing with Penwarden may resent a third party chasing them. Option B tackles the cause and costs less than factoring, but its $500,000 depends on customers responding as expected, and stopping supplies to slow payers may lose customers, many of whom are small businesses with cash problems of their own, which raises the risk of bad debts.
A strong answer will probably favour B, perhaps with a short-term measure, such as factoring only the slowest accounts, while it takes effect. It should also notice what the ratios say beyond debtors: Penwarden pays suppliers in 30 days, so negotiating 45-day terms would keep about $210,000 more in the business at no interest cost, if suppliers agree. What would change the recommendation? Evidence that customers would move to rivals over tighter terms would favour factoring, and a business that needed the cash within weeks, not months, could not wait for B to work.
Section 13: Exam-style practice
Original questions written by the platform in the style of the papers, with what a strong response does. They are not IB questions and the guidance is not an official markscheme.
-
Juniper Home Stores, a fictional retailer of kitchenware, had opening stock of $45,000 and closing stock of $35,000 for the year. Its cost of sales was $480,000.
Calculate Juniper Home Stores' stock turnover (i) in number of times and (ii) in number of days.
What a strong response does
A strong response shows each stage:
- Average stock = (45,000 + 35,000) ÷ 2 = $40,000.
- (i) Stock turnover = 480,000 ÷ 40,000 = 12 times a year.
- (ii) Stock turnover = (40,000 ÷ 480,000) × 365 = 30.42 days.
Two marks for each part: one for the correct working, including the average stock, and one for the answer with its unit. Using closing stock instead of the average, or sales revenue instead of cost of sales, loses the method mark.
-
Ashby Print, a fictional printing business, had debtors of $54,000 and total sales revenue of $657,000. Its trade creditors were $42,000 and its cost of sales $438,000.
Calculate Ashby Print's (i) debtor days and (ii) creditor days.
What a strong response does
A strong response shows each stage:
- (i) Debtor days = (54,000 ÷ 657,000) × 365 = 30.00 days.
- (ii) Creditor days = (42,000 ÷ 438,000) × 365 = 35.00 days.
Two marks for each part. A common error is to divide debtors by cost of sales or creditors by sales revenue. A good answer might add that Ashby is paid five days sooner than it pays its suppliers, which helps its cash flow.
-
Kittiwake Hotels, a fictional hotel group, borrowed to build a new hotel in 2026. Its non-current liabilities rose from $2.0 million in 2025 to $4.5 million in 2026; its equity was $3.0 million in both years.
Comment on the change in Kittiwake Hotels' gearing ratio between 2025 and 2026.
What a strong response does
A strong response first calculates the ratios, then judges them:
- 2025: 2.0 ÷ (2.0 + 3.0) × 100 = 40.00%; 2026: 4.5 ÷ (4.5 + 3.0) × 100 = 60.00%.
- Gearing has risen by 20 percentage points, and at 60% Kittiwake is now highly geared by the usual rule of thumb: most of its long-term finance is borrowed.
- It must pay more interest whatever its profits, which is risky in an industry where bookings can fall sharply, and lenders may be reluctant to lend more.
- The judgement depends on the new hotel: if it earns a return above the interest rate, the borrowing raises returns to the owners; if bookings disappoint, the interest becomes a burden.
-
Distinguish between insolvency and bankruptcy.
What a strong response does
A strong response makes the difference clear for both terms:
- Insolvency is a financial state: a business cannot pay its debts as they fall due, or its liabilities exceed its assets.
- Bankruptcy is a legal process that may follow insolvency, in which a court oversees how the debts are dealt with, through restructuring or the sale of assets to repay creditors.
- The key difference: insolvency can be temporary and resolved without the courts, for example by raising new finance, while bankruptcy is the formal legal outcome when it is not.
An example of a business that is insolvent but recovers would strengthen the answer.
-
Explain why a profitable business can become insolvent.
What a strong response does
A strong response explains the difference between profit and cash and gives causes:
- Profit is recorded when sales are made, but cash arrives only when customers pay, so a business selling on long credit terms can be profitable while short of cash.
- Cash can be tied up in stock that has not yet sold, shown by slow stock turnover.
- Rapid growth (overtrading), large loan repayments or the purchase of assets can use up cash faster than profit replaces it.
- If the business cannot then pay its suppliers, its lenders or its staff when payment falls due, it is insolvent, whatever its profit.
Two causes, each clearly linked to the gap between profit and cash, make a complete answer.
-
Rookwood Furniture, a fictional manufacturer, has cost of sales of $3,650,000 a year and average stock of $730,000, so its stock turns over 5 times a year, every 73 days, compared with 8 times two years ago. Its non-current liabilities are $2.9 million and its equity $2.1 million, a gearing ratio of 58%. Interest rates are rising.
Evaluate two strategies Rookwood Furniture could use to improve its efficiency ratios.
What a strong response does
A strong response would choose two strategies that fit the evidence, for example:
- Reduce stock, by ordering materials closer to when they are needed (moving towards just-in-time), making more furniture to order and clearing slow-selling finished goods. Returning to 8 times a year would cut average stock to 3,650,000 ÷ 8 = $456,250, about 45.63 days, and release $273,750 of cash. Weigh: the risk of running out of materials and missing delivery dates, losing bulk discounts, the cost of discounting old stock, and whether suppliers can deliver reliably.
- Reduce gearing, by issuing shares, retaining profit, or using the cash released from stock to repay part of the loans. Repaying $273,750 would cut gearing to (2,626,250 ÷ 4,726,250) × 100 = 55.57%, still high, so a share issue may also be needed. Weigh: dilution of the owners' control, lower dividends, and the cost of issuing shares, against lower interest costs and less risk as interest rates rise.
It would note that the strategies support each other, since cash released from stock can repay debt, and reach a justified judgement, for example that reducing stock comes first because it is within Rookwood's control and funds part of the debt reduction, while gearing above 50% with rising interest rates makes further action necessary. Answers that list strategies without using the figures or the case are limited.
Section 14: Revision summary
The subtopic on one page: what to remember.
- Efficiency ratios show how well a business manages its stock, the credit it gives and takes, and the mix of borrowing and owners' money in its long-term finance.
- Stock turnover (times) = cost of sales ÷ average stock; stock turnover (days) = (average stock ÷ cost of sales) × 365; average stock = (opening stock + closing stock) ÷ 2.
- Debtor days = (debtors ÷ total sales revenue) × 365; creditor days = (creditors ÷ cost of sales) × 365.
- Gearing ratio = (non-current liabilities ÷ capital employed) × 100, where capital employed = non-current liabilities + equity.
- Faster stock turnover and fewer debtor days free cash; more creditor days keep cash longer but strain suppliers; above about 50% gearing is usually seen as high.
- Compare each ratio with past years, similar businesses and credit terms, and read them together to explain changes in liquidity and profitability.
- Every strategy has a cost, and helping one ratio can harm another, so judge strategies against the cause of the problem and the whole set of accounts.
- Insolvency is being unable to pay debts; bankruptcy is the legal process that may follow. A profitable business can become insolvent because profit is not cash.
Section 15: The mindmap
The four HL efficiency ratios, stock turnover, debtor days, creditor days and gearing, how to improve each and at what cost, and the difference between insolvency and bankruptcy.
Drag to move the map, or use the arrow keys. Click a branch to fold it away. Whole map shows all of it; zoom with the buttons, or with Ctrl and the scroll wheel.
- Core ideas
- Calculations
- Evaluation
- Advantage
- Limitation
- HL HL only
The map as an outline
Efficiency ratios HL
Core ideas
- Definition How well stock, credit and finance are managed HL
- Explain changes in liquidity and profit HL Slow stock and late payers tie up cash; high gearing adds interest.
- Judge against past years and similar firms HL
- The guide puts gearing in this group HL Elsewhere it is usually called a solvency or financial structure ratio.
Stock turnover HL
Calculations
- Formula Number of times a year HL Stock turnover (number of times) = cost of sales ÷ average stock
- Formula Number of days HL Stock turnover (number of days) = (average stock ÷ cost of sales) × 365
- Formula Average stock HL Average stock = (opening stock + closing stock) ÷ 2
- More times, or fewer days, means faster sales HL
- Example Fresh food turns over fast, furniture slowly HL
Debtor days and creditor days HL
Calculations
- Formula Debtor days HL Debtor days ratio (number of days) = (debtors ÷ total sales revenue) × 365 Fewer days means customers pay sooner.
- Formula Creditor days HL Creditor days ratio (number of days) = (creditors ÷ cost of sales) × 365 More days keeps cash longer but can strain suppliers.
- Question Paid by customers before paying suppliers? HL Debtor days below creditor days help cash flow.
- Example Debtors $50,000, sales $365,000: 50 days HL
Gearing ratio HL
Calculations
- Formula Gearing ratio HL Gearing ratio = (non-current liabilities ÷ capital employed) × 100
- Formula Capital employed HL Capital employed = non-current liabilities + equity
- Above about 50% is highly geared HL More interest to pay and more exposed to rising interest rates.
- Low gearing is safer but may slow growth HL
Improving the ratios HL
Evaluation
- Stock: hold less, clear slow lines, use JIT HL
- Limitation Risk of running out and losing sales HL
- Debtors: credit checks, chasing, factoring HL
- Limitation Customers may move to rivals offering credit HL
- Creditors: negotiate longer credit terms HL
- Limitation Suppliers may refuse credit or discounts HL
- Gearing: issue shares, retain profit, repay loans HL
- Limitation New shares dilute the owners' control HL
Insolvency versus bankruptcy HL
Core ideas
- Definition Insolvency: cannot pay debts when due HL A financial state, which may be temporary.
- Definition Bankruptcy: the legal process that may follow HL A court deals with the debts, usually by selling assets.
- Definition Liquidation: a company closed, assets sold HL
- Profitable firms can still become insolvent HL Profit is not cash (3.7).
- Laws and terms differ between countries HL
Open the mindmap on its own page, with its terms and connections.
Section 16: Key terms
Defined in the platform's own words. Each opens its full entry.
- Bankruptcy HL
- The legal status of a person or business that a court has formally declared unable to pay its debts, after which its assets are usually taken and sold to repay its creditors as far as possible.
- Capital employed
- The long-term finance used by a business, made up of its non-current liabilities and its equity.
- Creditor days HL
- The average number of days a business takes to pay the suppliers it buys from on credit.
- Creditors
- The amounts a business owes to suppliers for goods and services bought on credit, and the suppliers themselves; shown as trade creditors, a current liability.
- Debt factoring
- Selling the money owed by customers to a specialist firm, the factor, which pays most of it to the business straight away and then collects the debts itself, keeping a fee.
- Debtor days HL
- The average number of days a business takes to collect the money its customers owe it.
- Debtors
- Customers who have bought goods or services on credit and not yet paid, and the total they owe the business, which is a current asset.
- Efficiency ratios HL
- Ratios that show how well a business manages its stock, collects money from customers, pays its suppliers and finances itself; in the guide these are stock turnover, debtor days, creditor days and the gearing ratio.
- Equity
- The owners' stake in the business, which in the guide's layout is share capital plus retained earnings and always equals net assets.
- Gearing ratio HL
- Non-current liabilities as a percentage of capital employed, which shows how much of a business's long-term finance is borrowed rather than provided by its owners.
- Insolvency HL
- A financial state in which a person or business cannot pay its debts as they become due, or in which its liabilities are greater than its assets.
- Liquidation HL
- The formal closure of a company, in which its assets are sold and the money raised is used to pay its creditors, after which the company ceases to exist.
- Non-current liabilities
- Debts a business does not have to repay within the next year, such as long-term bank loans, mortgages and debentures; the guide's layout shows them as long-term borrowings.
- Ratio analysis
- Comparing one figure from the final accounts with another, as a percentage, a ratio, a number of times or a number of days, to judge a business's performance and financial health.
- Stock
- The goods a business holds, including raw materials and components waiting to be used, work in progress and finished goods waiting to be sold; a current asset.
- Stock turnover HL
- How quickly a business uses or sells its stock, measured either as the number of times its average stock is used up and replaced in a year or as the average number of days stock is held.
Section 17: Tools and practice
7 tools on the platform for 3.6, by room, with exercises, worked calculations and practice questions.
Advanced financial analysis
- Financial performance dashboard Enrichment
- Integrated forecast Enrichment
Section 18: Check your recall
Answer from memory, then reveal and rate yourself. Your ratings stay on this device.
Answer each question from memory, out loud or on paper, before you reveal the answer. Your ratings also schedule these questions in your flashcards.
-
Which four ratios does the guide call efficiency ratios?
Stock turnover, debtor days, creditor days and the gearing ratio.
How well did you recall it? -
Write the two formulas for stock turnover.
Stock turnover (number of times) = cost of sales ÷ average stock; stock turnover (number of days) = (average stock ÷ cost of sales) × 365, where average stock = (opening stock + closing stock) ÷ 2.
How well did you recall it? -
Why does stock turnover use cost of sales rather than sales revenue?
Because stock is valued at cost, so it must be compared with the cost of the goods sold, not with their selling price.
How well did you recall it? -
Cost of sales is $300,000, opening stock $20,000 and closing stock $30,000. Calculate stock turnover in times.
Average stock = (20,000 + 30,000) ÷ 2 = $25,000. Stock turnover = 300,000 ÷ 25,000 = 12 times a year.
How well did you recall it? -
Write the formulas for debtor days and creditor days.
Debtor days = (debtors ÷ total sales revenue) × 365; creditor days = (creditors ÷ cost of sales) × 365.
How well did you recall it? -
A business gives 30 days' credit and its debtor days are 48. What does this suggest?
Customers are paying 18 days late on average, so cash is tied up and credit control needs attention; the risk of bad debts may be rising.
How well did you recall it? -
Why can a rise in creditor days be a warning sign?
It may mean the business is paying late because it lacks cash, which can lose discounts, damage relationships and lead suppliers to tighten their terms.
How well did you recall it? -
Write the gearing formula and the guide's definition of capital employed.
Gearing ratio = (non-current liabilities ÷ capital employed) × 100, where capital employed = non-current liabilities + equity.
How well did you recall it? -
Non-current liabilities are $1.5 million and equity $3.5 million. Calculate the gearing ratio.
1.5 ÷ (1.5 + 3.5) × 100 = 30%.
How well did you recall it? -
Give one strategy to improve each of stock turnover and debtor days, with a cost of each.
For example, just-in-time ordering, at the risk of running out; and early-payment discounts or factoring, which cost profit.
How well did you recall it? -
What is the difference between insolvency and bankruptcy?
Insolvency is a financial state in which a business cannot pay its debts; bankruptcy is the legal process, overseen by a court, that may follow.
How well did you recall it? -
Why can a profitable business become insolvent?
Profit is not cash. Cash can be tied up in stock and debtors, or used for growth and loan repayments, so a profitable business can still be unable to pay its bills on time.
How well did you recall it?
Section 19: How it connects
Where 3.6 meets the rest of the course: worked connections with an exam-style question on each, then the further links the notes name.
-
The choice of finance sets the gearing HL
The gearing ratio shows how much of a business's capital employed comes from long-term borrowing: non-current liabilities divided by capital employed, where capital employed is non-current liabilities plus equity. Every choice of long-term finance in 3.2 moves it. Loan capital raises gearing and adds interest that must be paid in bad years as well as good; share capital and retained profit lower it, at the cost of sharing control or holding back dividends. A highly geared business can find further loans harder and dearer to obtain.
Exam-style question Source: Original practice question Command term: Calculate (AO4)
A business has non-current liabilities of $2.4 million and equity of $5.6 million. Calculate its gearing ratio. [2 marks]
The worked answer
Capital employed = $2.4m + $5.6m = $8.0m. Gearing ratio = $2.4m ÷ $8.0m × 100 = 30%.
-
Stock turnover and just-in-time HL
Stock turnover measures how quickly a business uses or sells its stock: cost of sales divided by average stock gives the number of times a year, and average stock divided by cost of sales, times 365, gives the number of days stock is held. Just-in-time stock control sets out to hold as little stock as possible, with deliveries arriving as they are needed, so it raises stock turnover and frees cash that would otherwise sit in a warehouse. The price is exposure: with no buffer, a late delivery can stop production, which is why just-in-case stock remains the alternative.
Exam-style question Source: Original practice question Command term: Explain (AO2)
Explain how a move to just-in-time stock control might affect a business's stock turnover ratio. [4 marks]
Also linked in the notes
- 3.4 Final accounts Every efficiency ratio is calculated from the statement of profit or loss and the statement of financial position.
- 3.5 Profitability and liquidity ratio analysis The efficiency ratios help to explain changes in the profitability and liquidity ratios, and ROCE and gearing share the guide's definition of capital employed.
- 3.7 Cash flow Stock, debtors and creditors make up the working capital cycle, and insolvency is a failure of cash flow, not of profit.
- 4.3 Sales forecasting At HL, more accurate sales forecasts let a business hold less stock without running short.
See 3.6 on the course connections map, with every link drawn across the five units.
Section 20: Connected learning
Everything else on the platform that teaches, applies or tests 3.6, each labelled by its standing.
- Revise
-
- The 3.6 mindmap Full and revision views, to print or download
- Revision sheet The subtopic on one printable page
- Flashcards The 3.6 cards, to rate as you go
- Practise
-
- 8 questions on 3.6 in the question bank From the practice sets, the notes and the case files, filtered to this subtopic
- Cases
-
- Bellbird Home and Garden Fictional Case Vault
- Decisions and simulations
-
- Kestle Cycles: the cash runs out first Fictional Boardroom simulation
- Corvell Furniture: three years to restore the margin Fictional Boardroom simulation
- Tools
-
- 7 tools for 3.6 In Tools and practice on this page: Finance Desk, Financial Laboratory, Advanced financial analysis
- Boardroom Briefings
-
- Quarrystone Climbing is offered its closest rival Fictional Briefing 2
- Velmar Components weighs a buyback against a factory for electric cars Fictional Briefing 9
- Business Intelligence
-
- Oracle's record year leaves free cash flow at minus $23.7 billion Real-world A real development, 10 June 2026, with its sources
- Diageo's Indian subsidiary agrees to sell Royal Challengers Bengaluru for INR 166.6 billion as Diageo cuts its debt Real-world A real development, 24 March 2026, with its sources
- Saks Global files for Chapter 11 and emerges five months later as Exemplar Luxury Group Real-world A real development, 14 January 2026, with its sources
- Advanced Management
-
- Financial statement analysis Enrichment Advanced financial management: beyond the IB course
- Risk, return, the cost of capital and capital structure Enrichment Advanced financial management: beyond the IB course
- Working capital, forecasting and cash flow modelling Enrichment Advanced financial management: beyond the IB course
- Scaling, innovation management, failure and recovery Enrichment Entrepreneurship and innovation: beyond the IB course
- Course connections
-
- 2 worked connections on the connections map With 3.2, 5.6
Notes checked against: Business management guide, first assessment 2024 (published February 2022, updated May 2022), pp. 29, 61, 64 (The three content statements and their assessment objectives (p. 29); the layout of the statement of financial position (p. 61); the formula list, which gives every efficiency ratio and the definitions of average stock and capital employed (p. 64)); Business management teacher support material, pp. 80 to 90 (The glossary, read to check the meanings of insolvency, bankruptcy and liquidity; nothing reproduced). Updated 2026-11-03. The IB guide is the authority on the course.
Arjun Agrawal | The Business Brief, https://the-business-brief-dun.vercel.app/topics/efficiency-ratio-analysis/. Original teaching material, not an IB publication. The organizations in the teaching cases are fictional unless a case says otherwise.