Revision sheet · Unit 5: Operations management

5.3 Lean production and quality management

HL only 13 definitions · 1 formula · 1 framework · 3 exercises
Read the full notes Flashcards for 5.3 (33)

HL This subtopic is HL only. If you are taking SL, it is extension material.

Key points

  • Lean production removes whatever adds cost or time without adding value for the customer. Its two features are less waste (overproduction, waiting, transport and motion, over-processing, excess stock, defects, and unused ideas) and greater efficiency.
  • Kaizen is continuous improvement through many small changes by everyone, kept as standard work, often using plan, do, check, act. It needs a culture of trust.
  • Just-in-time produces only what is needed, when it is needed, using pull production, kanban, small batches and reliable suppliers. It exposes problems but leaves little protection against disruption.
  • Cradle to cradle design means every material returns safely to nature (biological cycle) or is remade at equal quality (technical cycle), through safe materials, design for disassembly and take-back.
  • Quality control detects faults by inspection after they happen; quality assurance prevents them by building quality into every stage, with everyone responsible.
  • Quality circles are staff groups solving problems in their own area; benchmarking adopts the practices of the best performers; TQM makes quality everyone's job across the whole organization.
  • Quality standards, national or international such as ISO 9001, build customers' confidence and open contracts and export markets, but cost money, add paperwork and certify processes rather than excellence.
  • The impact of lean production and TQM can be lower costs, released cash, better quality and more involved staff, but they need investment, time and culture change, can intensify work and reduce resilience, and fail when copied as techniques alone.

Common examination mistakes

  1. “Lean production just means cutting jobs.”

    Instead: Its aim is removing waste from processes; done well it relies on the workforce to find improvements.

    Glossary: Lean production

  2. “Kaizen is a one-off improvement project.”

    Instead: It is a continuous habit of small improvements, not a single campaign.

    Glossary: Kaizen

  3. “Just-in-time means holding no stock at all.”

    Instead: It means holding minimal stock and receiving supplies as needed; most JIT systems still keep small buffers.

    Glossary: Just-in-time (JIT)

Key definitions

The IB glossary terms of 5.3, in the platform's own words. Terms beyond the course are not included.

Benchmarking
Measuring how well a business does something against the best performer, in its own industry or another, and adopting the better practices it finds.
Cradle-to-cradle design
Designing products and the way they are made so that, at the end of their use, every material can safely return to nature or be recovered as an input for new products, leaving no waste.
Efficiency
Producing a given output with as few resources as possible, or getting as much output as possible from the resources used.
Just-in-time (JIT)
A lean method of production and stock control in which materials arrive just as they are needed and goods are made to meet actual orders, so that little or no stock is held.
Kaizen
Continuous improvement: a lean method that relies on many small, low-cost changes suggested by the people who do the work, rather than on occasional large projects.
Lean production
A way of organizing operations that removes anything which does not add value for the customer, such as excess stock, waiting time, defects and unnecessary movement.
Quality
How well a good or service meets the needs and expectations of its customers, consistently, every time it is supplied.
Quality assurance
An approach that builds quality into every stage of a process, by setting standards and procedures that prevent faults rather than finding them at the end.
Quality circle
A volunteer group of staff from the same area of work who meet at set times to tackle the quality problems they see every day and to recommend improvements to managers.
Quality control
Checking products, usually at the end of a stage or of production, to find and remove items that do not meet the required standard.
Quality standard
A published set of requirements for a product, service or management process, set by a national or international body; a business that meets it can usually display a certificate or mark.
Total quality management (TQM)
A whole-organization approach in which every employee, in every department, takes responsibility for quality, with the aim of meeting customer needs and getting things right first time.
Waste (in lean production)
In lean thinking, any activity or use of resources that adds cost or time but adds nothing the customer values.

Formulae

Each with what it measures. The formula sheet shows which ones the examination provides.

Formula What it measures
Defect rate = units that fail to meet the quality standard ÷ units made × 100 The percentage of units produced that fail to meet the required quality standard.

Frameworks and tools

From the frameworks library: what each is for, a situation it suits, and one limitation.

  • Circular business models IB toolkit

    Purpose
    To find ways for a business to reduce waste and its use of new materials while protecting or raising its profit, and to evaluate whether a circular model suits a particular business.
    Use it when
    A business whose products end up as waste it could collect, repair or resell, such as clothing, electronics, furniture or tyres.
    One limitation
    Changing a business model takes investment, time and new capabilities.

Apply it

Short exercises on fictional businesses, written for the platform; none is an IB question. Answer first, then open the outline of what a strong answer does.

  1. Fictional Explain · AO2

    Ravelstone Furniture keeps three months' supply of timber, fabric and fittings in a large warehouse. Much of it is damaged or out of date by the time it is used.

    Explain how just-in-time production could help Ravelstone Furniture.

    Show a model answer outlineModel answer outline
    • With just-in-time, materials arrive as they are needed, so production is pulled by orders rather than pushed into stock.
    • Ravelstone Furniture would hold far less stock, cutting the cost of the warehouse, damage and items that go out of date.
    • Notes what JIT needs: reliable suppliers, quick deliveries and flexible production, or a late delivery stops the line.
  2. Fictional Distinguish · AO2

    Ravelstone Furniture inspects every finished sofa before dispatch and rejects about 4% of them.

    Distinguish between quality control and quality assurance, using Ravelstone Furniture.

    Show a model answer outlineModel answer outline
    • Quality control inspects finished products to find faults, as Ravelstone Furniture does before dispatch: it detects problems after the cost of making them.
    • Quality assurance builds quality into every stage of production, with standards, training and checks by each worker, to prevent faults.
    • Shows the difference for Ravelstone: quality assurance would aim to cut the 4% of rejects, not just catch them.
  3. Fictional Evaluate · AO3

    Ravelstone Furniture's new operations director wants to introduce total quality management across the business.

    Evaluate the likely impact of total quality management on Ravelstone Furniture.

    Show a model answer outlineModel answer outline
    • Benefits: fewer defects and less waste, more satisfied customers, and staff who are involved and motivated.
    • Costs: training, time and a change of culture that can take years, with a possible dip in output and resistance from staff or managers.
    • Considers what success depends on: commitment from senior managers and a culture that listens to workers.
    • Reaches a judgement, for example that TQM suits Ravelstone Furniture if managers are prepared for a long change rather than a quick fix.

Answer from memory

12 recall questions from the 5.3 notes

Answer each question from memory, out loud or on paper, before you reveal the answer. Your ratings also schedule these questions in your flashcards.

  1. What are the two features of lean production named in the guide?

    Less waste and greater efficiency.

    How well did you recall it?
  2. Name five of the kinds of waste that lean production aims to remove.

    For example, overproduction, waiting, unnecessary transport and motion, over-processing, excess stock and defects, and many add the unused ideas of employees.

    How well did you recall it?
  3. What is kaizen, and why does it depend on the culture of the business?

    Continuous improvement through many small changes suggested by the people who do the work. It needs employees who are trained, trusted and listened to, and who do not fear that improvements will cost jobs.

    How well did you recall it?
  4. What is the difference between push and pull production?

    In push production each stage makes as much as it can and passes it on, so stock builds up. In pull production nothing is made until the next stage, or the customer, asks for it.

    How well did you recall it?
  5. What is a kanban?

    A visual signal, such as a card or an empty container, that tells the previous stage or a supplier to send more of a particular part.

    How well did you recall it?
  6. Explain the two cycles in cradle to cradle design.

    In the biological cycle, natural materials break down safely and return to the soil. In the technical cycle, durable materials are recovered and remade at the same quality, again and again.

    How well did you recall it?
  7. What is the main difference between quality control and quality assurance?

    Quality control detects faults by inspection after products are made; quality assurance prevents faults by building quality into every stage of the process.

    How well did you recall it?
  8. What is a quality circle?

    A small group of employees doing similar work who meet regularly to identify, analyse and solve quality problems in their own area and recommend improvements.

    How well did you recall it?
  9. What is functional benchmarking, and why might it be easier than comparing with rivals?

    Comparing a process with the best performer at that process in any industry. Because that business is not a rival, it may be willing to share its data and methods.

    How well did you recall it?
  10. Give three principles of total quality management.

    For example, a focus on customers including internal customers, everyone responsible for quality, right first time, decisions based on data, continuous improvement and commitment from senior managers.

    How well did you recall it?
  11. Why are international quality standards important to an exporter?

    They are recognized across borders, so certification gives unfamiliar foreign customers confidence and meets the requirements of buyers who deal only with certified suppliers.

    How well did you recall it?
  12. Of 900 units made, 27 fail to meet the standard. What is the defect rate?

    27 ÷ 900 × 100 = 3%.

    How well did you recall it?

Reveal and rate each card.

Arjun Agrawal | The Business Brief. Gathered from the platform's notes, glossary, calculation register and frameworks library. Original teaching material; not an IB publication.